Overview+-

The Vivitek D860 is a high-performance digital projector that offers exceptional digital images with full color saturation. This projector features native SVGA resolution, multiple connectivity options and 3000 lumens of brightness. Add 3D-ready capabilities, and the D860 is the ideal projector for just about any multimedia/video application. Functionality, performance and value: all found in the Vivitek D860

Key features

DLP® Technology

DLP (Digital Light Processing) is a display technology from Texas Instruments (TI). The technology inside is often referred to as DMD (Digital Micro-Mirrors). It consists of an array of mirrors where each mirror represents a pixel element. For example, a high-definition DLP projector or rear projector with 1920 x 1080 pixel resolution would have over 2 million tiny mirrors. Each mirror is attached to an electronically driven hinge that controls the amount of colored light that is reflected from

BrilliantColor™

BrilliantColor from Texas Instruments is a multi-color processing technology that produces vibrant images. BrilliantColor technology uses up to six colors, instead of just the three primary colors, red, green and blue, to improve color accuracy and brightens secondary colors.

3D Ready

A projector that is 3D Ready can accept a 120Hz frame-sequential 3D signal from a computer. These projectors are not compatible with the HDMI 1.4 3D specification used on 3D Blu-ray players and set-top boxes. 3D ready uses DLP Link Technology from Texas Instruments.

Filter-Free

DLP technology allows manufacturers to create a filter-free projection design. Filter-free means significant savings and lower maintenance efforts over the projector's lifespan, which means a lower total cost of ownership for the projector.

Specifications+-

Native Resolution

SVGA (800 x 600)

Brightness

3000 ANSI Lumens

Contrast Ratio

15,000:1

Max. Supported Resolution

UXGA (1600 x 1200) @60Hz

Native Aspect Ratio

4:3

Lamp Life and Type

4,500 / 6,000 Hours (Boost / Std. Mode), 190W/160W

Display Type

Single chip DLP® Technology by Texas Instruments

Chip Size

0.55” DMD

Throw Ratio

1.93 - 2.16:1

Image Size (Diagonal)

23" - 300"

Projection Distance

1 - 10 m

Projection Lens

F=2.52 - 2.73, f = 21.8 - 24mm

Zoom Ratio

1.1x

Offset

128%

Keystone Correction

Vertical +/- 40°

Speakers

Video Compatibility

SDTV(480i, 576i), EDTV (480p, 576p), HDTV (720p, 1080i/p), NTSC (M, 3.58/4.43 MHz), PAL (B, D, G, H, I, M, N), SECAM (B, D, G, K, K1, L)

I/O Connection Ports

VGA-In (15pin D-Sub), Composite Video, Audio-In (Mini-Jack), VGA-Out (15pin D-Sub), RS-232

Dimensions (W x D x H)

285 x 261 x 121.8 mm

Weight

2,72 kg

Noise Level

33dB/35dB (Std. / Boost Mode)

Power

Supply: AC 100-240V, 50/60Hz Consumption: 230 W (Std. Mode), 260W (Boost Mode), <0.5W (Standby Mode)

Standard Accessories

VGA Cable, User Manual (CD), Lens Cap, Carrying Case, Quick Start Guide, Warranty Card (by region), Remote Controller (with battery), AC Power Cord

Optional Accessories

Remote Control P/N: 5041818400

Warranty

UPC Code

814964 335401

Image gallery+-

Accessories+-

Replacement Lamp

Power: 190 W
Part number: 5811117175-SU

IR Remote Control

Part number: 5041818400

Documentation+-

Vivitek Control Protocols

RS232 Version 2.2

Distance Calculator+-

Vivitek Projector Distance Calculator v2.0

A = <> <>

Fixed lens - on axis

4:3 16:10 16:9

cm inch

Note on using the projector distance planning calculator and tips for projector installation:
Calculator accuracy +/-5%. The calculator is designed to help you plan your installation and find the right projector. It is not designed to provide exact dimensions. When calculating the throw distance, bear in mind that the distance is measured from the front of the lens to the projection surface, except for Ultra Short Throw projectors with a mirror system. Where possible, attempt to position the projector in the middle of the zoom range , which is where the optics is optimized for. Try to avoid the extreme outer boundaries as the projector lenses has variance and performance tolerances that could make the screen not being filled, or the image being larger than the screen, caused by small variances in the optical systems. If you need to be at the extreme outer boundaries, we recommend that you order the projector and test the actual distance in your environment before fixing any mounting parts to the wall or ceiling.

D860

Give Your Large-Screen Viewing a Boost

Key features

Replacement Lamp

IR Remote Control

Vivitek Control Protocols

>

Projectors+

Company+

Support+

Vivitek aims for the utmost level of satisfaction and offers a warranty scheme for the EMEA region where all Vivitek's projectors are warranted against failure for a period of two, three or five years depending on the model and the number of hours operated.

Warranty

Product registration

Product registration for education

Contact Support

Contact us for any demonstration or sales requests. For product support questions, please visit our support page

Sales & Marketing

Customer Service & Technical Support

Product registration

Subscribe to our newsletter

Join in the Vivitek community

Manage consent to cookies